# Initial Password Check & Input (EMEA only)

#Required Tools

---

#Estimate Time

Approx. 1 min.

#Startup Mode

Repair mode

#Standard Values

---

#Step

1. Start the printer in repair mode. Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.

   
   

   Check Point / チェックポイント

   Before this adjustment, check if the password label is attached to the product. (Shown by red frame in below photo) If it is not attached, skip this adjustment.

2. Start the Service Program and select Initial Password Check & Input (EMEA only).

3. Click the [Input] button and write the initial password to the printer. (If you get an error, check if the entered value is correct)

4. Click the [Check] button and confirm that the initial password value displayed on the screen is the same as the value on the password label attached to the product.