0014C0 (Maintenance Unit Position Detection Failure Error)
Error contents
- Specific positions are detected by the (photosensor) flag. That flag cannot be detected.
Suspected cause
- Harness (CN7/No.3) broken or disconnected
- Maintenance Unit Motor failure
- Gear failure/slipping of teeth
- Pump Cap Unit internal sensor failure
Parts/Components to be checked
- Pump Cap unit
Troubleshooting
| Step | Confirmation points and methods | Page | YES | NO |
|---|---|---|---|---|
| 1 | Check the following connections for an abnormality such as a connector disconnection or a broken cable. If an abnormality is found, reconnect it.
Does the product recover from the error? | End | Go to step 2 | |
| 2 | Replace the Pump Cap Unit Does the product recover from the error? | Pump Cap unit | End | Escalate to person in charge |