Recommended Tools

To protect this product from damage, use the tools indicated in the following table.

For the tools required to perform the adjustment, refer to “Tools/Consumables for "Adjustments”.

NameExplanationParts
Phillips screwdriver No. 1Length of 40 mm or longer (Magnetized is desirable)
  • Ink Tube
  • Supply Tube
  • Sensors
Phillips screwdriver No. 2Length of 300 mm or longer (Magnetized is desirable)All parts
Flathead screwdriverNone.All parts
Ratchet screwdriverNone in particularAll parts
C-ring pliersNone in particularPF Scale/Sub PF Scale
TweezersNone.All parts
Acetate tapeTo secure the cable or harness and take measures against sharp edgesAll parts (used in the case of peeling or during parts replacement)
RagsTo prevent soiling of the printer during work
  • Printhead
  • Pump Cap Unit
  • Ink Tube
  • Self Sealing Valve Assy
Caster replacement toolNone in particularCasters
Needle-nose pliersNone in particularAll parts
Spanner 17None in particularCasters
Phillips screwdriver No. 2Shaft must be 100 mm or longer.All parts