Electric Circuit Board Related Parts

Panel Assy

Required Operations			Service Program
Replacement	1	Parts replacement	---
After replacement	2	Power ON (Inspection mode)	---
After replacement	3	Display Check

Wireless LAN (WLAN) Board

Required Operations			Service Program	Tools	Paper Type	Replaced	Reattached
Replacement	1	Parts replacement	---

CH83 Sub IF Board

Required Operations			Service Program	Tools	Paper Type	Replaced	Reattached
Replacement	1	Parts replacement	---

CE46 SUB-C Board

Required Operations			Service Program	Tools	Paper Type	Replaced	Reattached
Replacement	1	Parts replacement	---

TPM (CH35 SUB T) Board

Required Operations			Service Program	Reattached
Before replacement	1	Power ON (Repair mode)	---	---
	2	Back up encryption data to USB memory	---	---
	3	Power OFF	---	---
Replacement	4	Parts replacement	---
After replacement	5	Power ON (Repair mode)	---	---
	6	Restore encryption data to USB memory	---	---
	7	Power ON (Repair mode)	---	---
	8	TPM (CH35 SUB T) Board Replacement Date & Time Setting		---

Printer Main Circuit Board (With SSD/PS) (NVRAM backup OK)

Required Operations			Service Program	Paper Type	Reattached
Before replacement	1	Power ON (Repair mode)	---		---
	2	NVRAM Data Backup & Restore (Backup)			---
	3	Power OFF	---		---
Replacement	4	Parts replacement	---
After replacement	5	Remove the TPM (CH35 SUB T) board and SSD	---		---
	6	Power ON (Printer starts up in inspection mode)	---		---
	7	Firmware Install			---
	8	The printer automatically starts up in inspection mode	---		---
	9	Power OFF	---		---
	10	Power ON (Printer starts up in inspection mode)	---		---
	11	Write Setting Value Information			---
	12	Power ON (Repair mode)	---		---
	13	Write NW/Authentication Data			---
	14	Assemble the TPM (CH35 SUB T) Board and SSD	---		---
	15	Power ON (Repair mode)	---
	16	RTC Check & Input			---
	17	Date and Time Settings from LCD Panel	---		---
	18	SSD Check			---
	19	PS3 Unit Check			---
	20	Main Circuit Board Replacement Date & Time Setting			---
	21	Nozzle Verification Technology Noise Check		PGPP250 16 inches or more
	22	Nozzle Verification Technology Trouble Check		PGPP250 16 inches or more

Printer Main Circuit Board (With SSD/PS) (NVRAM backup NG)

Required Operations			Service Program	Tools	Paper Type	Replaced	Reattached
Replacement	1	Parts replacement	---
After replacement	2	Remove the TPM (CH35 SUB T) board and SSD	---				---
	3	Power ON (Printer starts up in inspection mode)	---				---
	4	Firmware Install					---
	5	The printer automatically starts up in inspection mode	---				---
	6	Power OFF	---				---
	7	Power ON (Printer starts up in inspection mode)	---				---
	8	Main Circuit Board Initial Setting					---
	9	Power ON (Repair mode)	---				---
	10	Input Offset Value					---
	11	Power OFF	---				---
	12	Assemble the TPM (CH35 SUB T) Board and SSD	---				---
	13	Power ON (Repair mode)	---
	14	Suction Fan Input & Check					---
	15	RTC Check & Input					---
	16	Date and Time Settings from LCD Panel	---				---
	17	MAC Address Check & Input		Network cable			---
	18	Serial Number Input					---
	19	Initial Password Check & Input (EMEA only)					---
	20	SSD Check					---
	21	PS3 Unit Check					---
	22	Main Circuit Board Replacement Date & Time Setting					---
	23	Head ID Check & Input					---
	24	Power ON (Repair mode)	---				---
	25	CR Motor Measurement & Auto Adjustment					---
	26	PF Motor Measurement & Auto Adjustment					---
	27	Sub PF Motor Measurement & Auto Adjustment					---
	28	1st Roll Paper Motor Measurement & Adjustment			New PGPP250 24 inches		---
	29	2nd Roll Paper Motor Measurement & Adjustment			New PGPP250 24 inches		---
	30	1st / 2nd Release Motor Measurement & Adjustment					---
	31	Cutter Motor Measurement & Auto Adjustment					---
	32	Cutter Motor Life Span Measurement & Auto Adjustment					---
	33	Pump Cap Unit Measurement & Auto Adjustment					---
	34	Power OFF	---				---
	35	Power ON (Inspection mode)	---				---
	36	Rear AD Adjustment (UPE)		Standard sheet (JETRAS)			---
	37	Rear AD Adjustment (BPE)		Standard sheet (JETRAS)			---
	38	Power OFF	---				---
	39	Power ON (Repair mode)	---				---
	40	Head Alignment Check			PGPP250 16 inches or more
	41	Nozzle Verification Technology Noise Check			PGPP250 16 inches or more
	42	Nozzle Verification Technology Trouble Check			PGPP250 16 inches or more	---
	43	Nozzle Verification Technology Rank Sort (including initialization)			PGPP250 16 inches or more		---
	44	Nozzle Verification Technology Check			PGPP250 16 inches or more		---
	45	PG Check & Adjustment		Feeler Gauge			---
	46	Paper Feed Adjustment			PGPP250 16 inches		---
	47	PW Sensor Check & Adjustment			Matte Paper A4		---
	48	T&B&S Check & Adjustment		Scale	Matte Paper A4 Plain paper A3/Tabloid		---
	49	Cut Position Check & Adjustment		Scale	PGPP250 16 inches or more		---
	50	Uni-D Alignment			PGPP250 16 inches or more		---
	51	Bi-D Adjustment			PGPP250 16 inches or more		---
	52	Ruled Line Deviation Adjustment (Auto)/Ruled Line Deviation Adjustment (Manual)			Cut sheet paper feed: PGPP250 16 inches Roll paper feeding 44 inch machine: PGPP250 44 inches 36 inch machine: PGPP250 36 inches 24 inch machine: PGPP250 24 inches		---
	53	Colorimetric & Raster Calibration		Calibrator	Plain paper (A4 / Letter or larger size, roll paper is acceptable) 2 sheets of matte paper A3 / Tabloid (11 x 17 inch)		---

Printer Main Circuit Board (Without SSD/PS) (NVRAM backup OK)

Required Operations			Service Program	Paper Type	Reattached
Before replacement	1	Power ON (Repair mode)	---		---
	2	NVRAM Data Backup & Restore (Backup)			---
	3	Power OFF	---		---
Replacement	4	Parts replacement	---
After replacement	5	Remove the TPM (CH35 SUB T) board and SSD	---		---
	6	Power ON (Printer starts up in inspection mode)	---		---
	7	Firmware Install			---
	8	The printer automatically starts up in inspection mode	---		---
	9	Power OFF	---		---
	10	Power ON (Printer starts up in inspection mode)	---		---
	11	Write Setting Value Information			---
	12	Power ON (Repair mode)	---		---
	13	Write NW/Authentication Data			---
	14	Assemble the TPM (CH35 SUB T) Board and SSD	---		---
	15	Power ON (Repair mode)	---
	16	RTC Check & Input			---
	17	Date and Time Settings from LCD Panel	---		---
	18	Main Circuit Board Replacement Date & Time Setting			---
	19	Nozzle Verification Technology Noise Check		PGPP250 16 inches or more
	20	Nozzle Verification Technology Trouble Check		PGPP250 16 inches or more

Printer Main Circuit Board (Without SSD/PS) (NVRAM backup NG)

Required Operations			Service Program	Tools	Paper Type	Replaced	Reattached
Replacement	1	Parts replacement	---
After replacement	2	Remove the TPM (CH35 SUB T) board and SSD	---				---
	3	Power ON (Printer starts up in inspection mode)	---				---
	4	Firmware Install					---
	5	The printer automatically starts up in inspection mode	---				---
	6	Power OFF	---				---
	7	Power ON (Printer starts up in inspection mode)	---				---
	8	Main Circuit Board Initial Setting					---
	9	Power ON (Repair mode)	---				---
	10	Input Offset Value					---
	11	Power OFF	---				---
	12	Assemble the TPM (CH35 SUB T) Board and SSD	---				---
	13	Power ON (Repair mode)	---
	14	Suction Fan Input & Check					---
	15	RTC Check & Input					---
	16	Date and Time Settings from LCD Panel	---				---
	17	MAC Address Check & Input		Network cable			---
	18	Serial Number Input					---
	19	Initial Password Check & Input (EMEA only)					---
	20	Main Circuit Board Replacement Date & Time Setting					---
	21	Head ID Check & Input					---
	22	Power ON (Repair mode)	---				---
	23	CR Motor Measurement & Auto Adjustment					---
	24	PF Motor Measurement & Auto Adjustment					---
	25	Sub PF Motor Measurement & Auto Adjustment					---
	26	1st Roll Paper Motor Measurement & Adjustment			New PGPP250 24 inches		---
	27	2nd Roll Paper Motor Measurement & Adjustment			New PGPP250 24 inches		---
	28	1st / 2nd Release Motor Measurement & Adjustment					---
	29	Cutter Motor Measurement & Auto Adjustment					---
	30	Cutter Motor Life Span Measurement & Auto Adjustment					---
	31	Pump Cap Unit Measurement & Auto Adjustment					---
	32	Power OFF	---				---
	33	Power ON (Inspection mode)	---				---
	34	Rear AD Adjustment (UPE)		Standard sheet (JETRAS)			---
	35	Rear AD Adjustment (BPE)		Standard sheet (JETRAS)			---
	36	Power OFF	---				---
	37	Power ON (Repair mode)	---				---
	38	Head Alignment Check			PGPP250 16 inches or more
	39	Nozzle Verification Technology Noise Check			PGPP250 16 inches or more
	40	Nozzle Verification Technology Trouble Check			PGPP250 16 inches or more	---
	41	Nozzle Verification Technology Rank Sort (including initialization)			PGPP250 16 inches or more		---
	42	Nozzle Verification Technology Check			PGPP250 16 inches or more		---
	43	PG Check & Adjustment		Feeler Gauge			---
	44	Paper Feed Adjustment			PGPP250 16 inches		---
	45	PW Sensor Check & Adjustment			Matte Paper A4		---
	46	T&B&S Check & Adjustment		Scale	Matte Paper A4 Plain paper A3/Tabloid		---
	47	Cut Position Check & Adjustment		Scale	PGPP250 16 inches or more		---
	48	Uni-D Alignment			PGPP250 16 inches or more		---
	49	Bi-D Adjustment			PGPP250 16 inches or more		---
	50	Ruled Line Deviation Adjustment (Auto)/Ruled Line Deviation Adjustment (Manual)			Cut sheet paper feed: PGPP250 16 inches Roll paper feeding 44 inch machine: PGPP250 44 inches 36 inch machine: PGPP250 36 inches 24 inch machine: PGPP250 24 inches		---
	51	Colorimetric & Raster Calibration		Calibrator	Plain paper (A4 / Letter or larger size, roll paper is acceptable) 2 sheets of matte paper A3 / Tabloid (11 x 17 inch)		---

CH12Power Supply Board

Required Operations			Service Program	Reattached
Replacement	1	Parts replacement	---
After replacement	2	Power ON (Repair mode)	---	---
	3	Power Supply Board Replacement Date & Time Setting		---
	4	CR Motor Measurement & Auto Adjustment		---
	5	PF Motor Measurement & Auto Adjustment		---
	6	Sub PF Motor Measurement & Auto Adjustment		---
	7	1st / 2nd Release Motor Measurement & Adjustment		---
	8	Cutter Motor Measurement & Auto Adjustment		---
	9	Pump Cap Unit Measurement & Auto Adjustment		---

CH83 Main-B Circuit Board

Required Operations			Service Program	Paper Type	Reattached
Replacement	1	Parts replacement	---
After replacement	2	Power ON (Firmware Update Mode)	---		---
	3	Firmware Install			---
	4	Power ON (Repair mode)	---
	5	Main-B Board Replacement Date & Time Setting			---
	6	Head Alignment Check		PGPP250 16 inches or more
	7	Nozzle Verification Technology Noise Check		PGPP250 16 inches or more
	8	Nozzle Verification Technology Trouble Check		PGPP250 16 inches or more

CH83 DRV-H Board Cooling Fan

Required Operations			Service Program	Tools	Paper Type	Replaced	Reattached
Replacement	1	Parts replacement	---

CH83 SUB (PW/IMS) Board

Required Operations			Service Program	Tools	Paper Type
Replacement	1	Parts replacement	---
After replacement	2	Power ON (Repair mode)	---
	3	IMS Adjustment			PGPP250 16 inches or more
	4	PW Sensor Check & Adjustment			Matte Paper A4
	5	T&B&S Check & Adjustment		Scale	Matte Paper A4 Plain paper A3/Tabloid

CH83 DRV-H Board

Required Operations			Service Program	Paper Type	Reattached
Replacement	1	Parts replacement	---
After replacement	2	Power ON (Repair mode)	---
	3	DRV-H Board Replacement Date & Time Setting			---
	4	Nozzle Verification Technology Noise Check		PGPP250 16 inches or more
	5	Nozzle Verification Technology Trouble Check		PGPP250 16 inches or more

# Electric Circuit Board Related Parts

#Panel Assy

#Wireless LAN (WLAN) Board

#CH83 Sub IF Board

#CE46 SUB-C Board

#TPM (CH35 SUB T) Board

#Printer Main Circuit Board (With SSD/PS) (NVRAM backup OK)

#Printer Main Circuit Board (With SSD/PS) (NVRAM backup NG)

#Printer Main Circuit Board (Without SSD/PS) (NVRAM backup OK)

#Printer Main Circuit Board (Without SSD/PS) (NVRAM backup NG)

#CH12Power Supply Board

#CH83 Main-B Circuit Board

#CH83 DRV-H Board Cooling Fan

#CH83 SUB (PW/IMS) Board

#CH83 DRV-H Board

Electric Circuit Board Related Parts

Panel Assy

Wireless LAN (WLAN) Board

CH83 Sub IF Board

CE46 SUB-C Board

TPM (CH35 SUB T) Board

Printer Main Circuit Board (With SSD/PS) (NVRAM backup OK)

Printer Main Circuit Board (With SSD/PS) (NVRAM backup NG)

Printer Main Circuit Board (Without SSD/PS) (NVRAM backup OK)

Printer Main Circuit Board (Without SSD/PS) (NVRAM backup NG)

CH12Power Supply Board

CH83 Main-B Circuit Board

CH83 DRV-H Board Cooling Fan

CH83 SUB (PW/IMS) Board

CH83 DRV-H Board