# CR Motor Measurement & Auto Adjustment

#Required Tools

---

#Estimate Time

Approx. 1 min.

#Startup Mode

Repair mode

#Standard Values

---

#Step

1. Start the printer in repair mode. Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.
   

2. Start the Service Program, and select CR Motor Measurement & Auto Adjustment.

3. If paper is loaded, remove it.

4. Click the [Run] button. This automatically calculates the correction value, and writes this value to the printer.

   Caution / 注意

   Do not touch the printer during adjustment as this may lead to adjustment failing.

   
   

5. If [Failed] is displayed, then perform adjustment again. If this is still unsuccessful, replace the CR Motor.