# IMS Adjustment

#Required Tools

PGPP250 that is more than 16 inches (Premium Glossy Photo Paper(250))

#Estimate Time

Approx. 3 min.

#Startup Mode

Repair mode

#Standard Values

---

#Step

1. Start the printer in repair mode. Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.
   
2. Set the paper.
3. Start the Service Program, and select IMS Adjustment.

4. Click the [Run] button. The Ink Mark Sensor will read the pattern, and adjustment will be performed automatically.

5. If adjustment fails, print an alignment check pattern, check that there is no nozzle clogging, and adjust again. If readjustment fails, there is a problem with the Ink Mark Sensor, so replace the Ink Mark Sensor.