# Ink Leak Flag Reset

#Required Tools

---

#Estimate Time

Approx. 1 min.

#Startup Mode

Inspection mode/Repair mode

#Standard Values

---

#Step

1. Start the printer in repair mode or inspection mode.

   • Repair mode
     Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.
     
   • Inspection mode
     Turn the power on while touching [Screen Left], and keep pressing until the mode select screen is displayed.
     
2. Start the Service Program, and select Ink Leak Flag Reset.

3. Click the [Execute] button to reset the flag.

   Check Point / チェックポイント

   If an ink leak is detected, that history will be written to the printer. Unless the error is reset by this adjustment, an ink leakage detection error (005001/005002/005003) will keep to occur when the printer is turned on. If there are ink leak and it is necessary to remove the ink, disconnect the connector of the ink leak sensor that detects the ink leak, restart the printer by repair mode, reset the ink leak, and then eject the ink.

4. Restart the printer, and check that no service calls have been generated.

   
   

   Caution / 注意

   If an ink leak has occurred, then ensure that you escalate this information.