00113C (CR Motor Reversing Error)

The number of occurrences of reversing the CR Motor has reached a predetermined limit.

Step	Confirmation points and methods	Page	YES	NO
1	Check the reading state of the CR Encoder using Service Program. If reading (from the Service Program) cannot be performed, re-install the CR Encoder. Does the product recover from the error?	CR Scale Check CR Encoder	End	Go to step 2
2	Check the cable connection of the CR Motor Check the connection status of the CR Motor again, and, if abnormal, reconnect. CR Encoder to CH83 SUB (On-CR) Board (CN102) CR Motor to CH83 Main-B Circuit Board (CN500) Does the product recover from the error?	CR Encoder CH83 SUB (PW/IMS) Board CR Motor CH83 Main-B Circuit Board	End	Go to step 3
3	Replace the CR Encoder. Does the product recover from the error?	CR Encoder	End	Go to step 4
4	Check the CR Belt state Check that the CR Belt is installed correctly. If an abnormality is found, reinstall it. Check that the CR Belt tension is within the standard value. Adjust the CR Belt tension adjustment if it is outside the standard value. Perform the CR Belt Deflection Adjustment. Does the product recover from the error?	CR Unit CR Belt Tension Check & Adjustment CR Belt Deflection Adjustment	End	Go to step 5
5	Replace the CR Motor. Does the product recover from the error?	CR Motor	End	Escalate to person in charge

# 00113C (CR Motor Reversing Error)