# Nozzle Verification Technology Rank Sort (including initialization)

#Required Tools

PGPP250 that is more than 16 inches (Premium Glossy Photo Paper(250))

#Estimate Time

Approx. 5 min.

#Startup Mode

Repair mode

#Standard Values

---

#Step

1. Start the printer in repair mode. Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.
   
2. Set the paper.
3. Start the Service Program, and select Nozzle Verification Technology Rank Sort (including initialization).

4. Click the [Print] button to print the alignment check pattern.

   Check Point / チェックポイント

   Ensure that you print an alignment check pattern, and check that there is no nozzle clogging. If there is any nozzle clogging, this results in an error.

   
   

5. Check the alignment check pattern, and check that the nozzles are discharging correctly. If there is nozzle clogging or bad alignment, then perform head cleaning to remedy the nozzle state.

6. Click the [Execute] button, and perform rank sorting. Rank sorting will be performed automatically.

7. After performing rank sorting, if "Successful" is displayed, then click the [OK] button. If an error is displayed, print an alignment check pattern again, check that there is no nozzle clogging, and adjust again.