# Printable area

#Roll Paper

The gray area in the illustration below shows the printable area.
When printing borderless at the left and right, the left and right margins will be 0 mm. When printing borderless on all sides, the margins on all sides will be 0 mm. The arrow in the illustration indicates the direction that the paper is ejected.

*1: If “Banner” is selected for “Roll Paper Option” in the printer driver “Advanced” tab, the top and bottom margins are 0 mm.

(1) to (4) in the figure represent the front end, the rear end, and the left and right margins. When printing borderless, the following values will be 0 mm.

• When printing borderless on the left and right: (2) (4)
• When printing borderless on all sides: (1) (2) (3) (4)

Other than this, it depends on the setting value of [Front margin] in the menu.

The manufacturer's default is 3mm/15mm.

Check Point / チェックポイント

Printing is disturbed when the final edge of the roll paper deviates from the core. Make sure that the end edge does not cover the print area. The printed size does not change even if the margin amount changes. Also, when printing the following paper in CAD/ Line Drawing mode, the values for (1) and (3) will be 3 mm. Singleweight Matte Paper

#Cut Sheets

When printing borderless at the left and right, the left and right margins will be 0 mm. (Board paper cannot be printed borderlessly)

The arrow in the illustration indicates the direction that the paper is ejected.