Paper Feed Mechanism (5)

Cable No.ConnectionError code that occurs when the cable disconnection/connection failure
11st Roll Spindle Lock Position Detection Sensor Full (G)Relay cable (CH83 Main-B Circuit Board (F) (CN522))
  • 1st roll spindle lock position detection open error Full
  • No error even if you don't lock
21st Roll Spindle Detection Sensor (A)Relay cable (CH83 Main-B Circuit Board (F) (CN522))
  • No error, but paper feed does not start (printer can not shift to paper feed sequence)
  • Nothing starts when operating from the panel. (Please set the roll paper and do not proceed. It also does not rotate the roll paper. It is judged that the installation has not been completed)
31st Roll Spindle Lock Position Detection Sensor Home (D)Relay cable (Printer Main Circuit Board (C) (CN90))
  • 1st roll spindle lock position detection open error Home
  • No error even if you don't lock
41st Paper Load Driven RLS Sensor (1st Roll Paper Detection Sensor Unit) (E)Relay cable (Printer Main Circuit Board (C) (CN90))00130D (ASF Motor Driving Time-Out Error)
51st paper path Paper detection sensor (1st Roll Paper Detection Sensor Unit) (H)

Relay cable (Printer Main Circuit Board (C) (CN91))

  • Paper eject waiting error
  • Paper eject error
  • No paper error
  • Roll paper end
61st Roll Paper Edge Detection Sensor (B)Printer Main Circuit Board (C) (CN612)

<Operate only when auto loading>

  • Paper feed error