# Document Feed Motor Measurement

#Required Tools

---

#Estimate Time

Approx. 1 min.

#Startup Mode

Repair mode

#Standard Values

---

#Step

Check Point / チェックポイント

If the scanner driver is not installed the PC, communication will not be possible printer and PC and an error will occur. Be sure to install the scanner driver before performing the service program.

1. Start the printer in repair mode. Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.

   
2. Start the Service Program, and select Document Feed Motor Measurement.
   
3. Click the [Execute] button to open a separate window.
   
4. In the separate window, double-click Document Feed Motor Measurement to perform measurement.
   
   • When a success message is displayed: Click the [OK] button, and continue to Step 5.
   • When a failure message is displayed: Perform adjustment again. If this is still unsuccessful, replace the Document Feed Motor, and perform adjustment again.
5. Close the separate window.