# Option SSD/PS3 Unit S/N information Write to NVRAM

#Required Tools

---

#Estimate Time

Approx. 1 min.

#Startup Mode

Repair mode

#Standard Values

---

#Step

1. Start the printer in repair mode. Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.
   

2. Start the Service Program, and select Option SSD/PS3 Unit S/N information Reset.

3. Click the [Run] button. Click the [Run] button to reset the serial number of the optional SSD unit written in the main circuit board NVRAM.

4. Turn the printer OFF to finish the adjustment.

5. Turn the printer ON to check result that printer could be recovered from the "Option version error" from the panel.