# SSD Check

#Required Tools

---

#Estimate Time

---

#Startup Mode

Repair mode

#Standard Values

---

#Step

1. Start the printer in repair mode. Turn the power on while touching [Screen Center], and keep pressing until the mode select screen is displayed. Touch the center of the panel to start repair mode.
   

2. Start the Service Program, and select SSD Check.

3. Click the [Run] button. Check whether communication with the SSD is OK. If “No SSD” or “SSD Not detected” is displayed, check the connection with the SSD and then run the check again.

4. Turn the printer OFF to finish the adjustment.