Scanner Unit Open Sensor

  1. Push two buttons (A), and open the Scanner Unit (B). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  2. Remove the screw on the printer home side. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  3. Remove the C Shape Washer (A). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)

    • : Black M3x4 Cup Step type S-tite screw
  4. Remove the Fixing Slider (A) from shaft. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  5. Remove the screw on the printer full side. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  6. Remove the C Shape Washer (A). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)

    • : Black M3x4 Cup Step type S-tite screw
  7. Remove the Fixing Slider (A) from shaft. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  8. Open the Scanner Unit (A). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  9. Remove the C Shape Washer (A) and the Fixing Slider (B). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  10. Remove the Washer (A) and the Strap (B). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)

  11. Remove the Scanner Paper Feed Flap (A) by disengaging its nine shafts.

    Assembly / 組み立て
    • Set the projection (A) of the Scanner Paper Feed Flap into the recess of the Scanner Paper Feed Flap Opening / Closing Sensor (B).
  12. Release the cable (A) from four grooves at the rear.
  13. Remove the two screws, and remove the Right Rear Guide A (B).

    • : Silver M3x6 Bind S-tite screw
  14. Remove the two screws, and remove the Right Rear Guide B (A).

    • : Silver M3x6 Bind S-tite screw
  15. Remove the screw, and remove the Right Edge Rear Guide (A).

    • : Silver M3x6 Bind S-tite screw
    Assembly / 組み立て
    • Install the Right Edge Rear Guide while inserting the frame into the groove of the Right Edge Rear Guide.
  16. Remove the cable (B) from the connector of the Scanner Unit Open Sensor (A).
  17. Disengage the two hooks, and remove the Scanner Unit Open Sensor (A).