Scanner Paper Feed Flap Opening / Closing Sensor

  1. Push two buttons (A), and open the Scanner Unit (B). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  2. Remove the screw on the printer home side. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  3. Remove the C Shape Washer (A). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)

    • : Black M3x4 Cup Step type S-tite screw
  4. Remove the Fixing Slider (A) from shaft. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  5. Remove the screw on the printer full side. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  6. Remove the C Shape Washer (A). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)

    • : Black M3x4 Cup Step type S-tite screw
  7. Remove the Fixing Slider (A) from shaft. (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  8. Open the Scanner Unit (A). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  9. Remove the C Shape Washer (A) and the Fixing Slider (B). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  10. Remove the Washer (A) and the Strap (B). (Only perform for SC-P8500DM series/SC-T7700DM series/SC-T5700DM series)
  11. Remove the two screws and remove the Left Front Guide B (A).

    • : Silver M3x6 Bind S-tite screw

  12. Remove the Scanner Paper Feed Flap (A) by disengaging its nine shafts.

    Assembly / 組み立て
    • Set the projection (A) of the Scanner Paper Feed Flap into the recess of the Scanner Paper Feed Flap Opening / Closing Sensor (B).
  13. Remove the two screws and remove the Left Front Guide B (A).

    • : Silver M3x6 Bind S-tite screw
  14. Remove the two screws and remove the Left Front Guide C (A).

    • : Silver M3x6 Bind S-tite screw
  15. Disengage the four hooks, and remove the Scanner Paper Feed Flap Opening / Closing Sensor (A).
  16. Remove the cable (A) from the connector, then remove the Scanner Paper Feed Flap Opening / Closing Sensor (B).

Adjustment / 調整

When removing/replacing this part, refer to following page and make sure to perform the specified operations including required adjustment.