Entering Fax Maintenance Mode

1	From power On status, press and hold the [Home button]. (Refer to “Service mode startup”)	-
2	ID#: Enter “20555”
3	Select “FAX Maintenance Mode” with [[2], [8] button] and press [#].	Authentication Mode 1.FAX Support Mode 2.FAX Maintenance Mode
4	Select the “FAX Parameter Setting”, and push [#] button.	FAX Maintenance Mode 1.Line Measurement Mode 2.FAX Parameter Setting
5	When the right screen appears, wait for about 1 minute until the screen is changed.	Preparing the selected Mode Please Wait
6	See the 2nd row on the screen for selection menu “0 to 9”: enter numbers “#”: select/excution Where "-" is displayed to the right of the displayed 3 digit number, there is no parameter assignment. When a setting change item is selected, the selection-type parameter transits to the “setting value selection screen” and the input-type parameter “setting value input screen”.	FAX Parameter Setting [000] 001. RAMEDIT PRINT 002. --- 003. --- 004. --- 005. PTCL LOG ON ERROR 006. PTCL LOG AUTO PRINT 007. PTCL LOG MULTI SAVE 008. RPT FWD/SAVE 009. RPT FWD/ADD Select : [0-9] or [:] / Enter:[♯]

# Entering Fax Maintenance Mode