# Repair Work Overview

This section describes procedures for disassembling the main components of products.

Be sure to follow the steps when disassembling the unit.
Unless otherwise specified, disassembled units or components can be reassembled by reversing the disassembly procedure.

WARNING:
Procedures which, if not strictly observed, could result in personal injury are described under the heading "WARNING".

Caution:
"Caution" signals a precaution which, if ignored, could result in damage to the equipment.

Check Point:
Important tips for procedures are described under the heading "Check Point".

Assembly:
If the assembly procedure is different from the reversed disassembly procedure, the correct procedure is described under the heading "Assembly".

Adjustment:
Adjustments required after the reassembly of the components or parts are described under the heading “Adjustment”. Be sure to perform the specified adjustments by referring to the "Adjustments & Additional Operations" chapter.

Lubrication:
"Lubrication" signals that the part needs to be lubricated when replacing or maintaining it after disassembling.

Note / 補足

This chapter uses photographs of products of the same series (e.g., WF-C5790 Series) to the extent that they do not affect the procedure.