Mechanical Adjustments and Inspections
| Adjustment name | Purpose | Adjustment procedure overview | Adjustment tool | |
|---|---|---|---|---|
| Adjustment | PG adjustment | Set the clearance of the gap between the nozzle surface of the print head and the platen to an appropriate amount. | Place a thickness gauge in the specified location and then move the CR unit over the thickness gauge and check the clearance. |
|
| Inspection | Ink leak check | To prevent ink leaks, make sure there is no ink leaking from the joints of the Printhead and Ink Supply Tubes. | When the Ink Supply Tubes are attached to the Printhead, insert the leak check jig and determine whether or not there is a leak by whether or not ink adheres to it. |
|