Ink eject

Required Tool

---

Procedure
Caution / 注意

The ink ejected in the maintenance box is not registered and the remaining space not checked. Furthermore, the menu starts ink ejection without checking the remaining amount of waste ink.

If this ink ejection is performed four or more times with the same maintenance box or if the maintenance box is already near full, waste ink may overflow from the maintenance box.

  1. Open the Ink Pack Cover, and push the lever (A) of the Front Cover Open Sensor and secure it with tape (B).
  2. Remove all ink packs from the ink pack tray.
  3. Start the Adjustment Program, and select “Ink eject”.
  4. Press the Perform button to execute the “Ink eject”.