Lubrication

This section describes necessary lubrication to maintain the functions and performance of this printer.
Make sure to properly lubricate the parts/units specified in this section as necessary when replacing or maintaining them.

Caution / 注意
  • Make sure to perform the lubrication following the specified lubrication points, lubricants, and amount. Otherwise, the printer may not operate normally.
  • When lubricating the originally installed parts, first wipe off the old lubricant completely.
  • Since using old grease may cause the grease dripping, make sure to use new grease when lubricating.
Lubrication points list
No.Corresponding PartName of LubricantLubrication ToolPage
Part namePart code
1PF RollerG-971635441⌀1 mm syringeLubrication 1
2PF PulleyG-971635441⌀1 mm syringeLubrication 2
3EJ RollerG-971635441BrushLubrication 3
4Main Frame/CR Guide FrameG-971635441⌀1 mm syringeLubrication 4
5CR UnitG-971635441⌀1 mm syringeLubrication 5
6CR Driven PulleyG-711304682⌀1 mm syringeLubrication 6
7

CR Driven Pulley Holder (1)

G-711304682⌀1 mm syringeLubrication 7
8CR Driven Pulley Holder (2)G-711304682⌀1 mm syringeLubrication 8
9

Paper Guide Front Assy (1)

G-971635441⌀1 mm syringe, ⌀3 mm syringeLubrication 9
10

Paper Guide Front Assy (2)

G-961590700Flux DispenserLubrication 10

G-971635441⌀2 mm syringe